Best Tall Jack Stands
There are many different brands and models of jack stands in the market. The main differentiating criterion used to categorize them is their weight capacity. The other factor is the stand’s maximum height.
In this article we take a close look at jack stands made specifically for high lifts. Some jack stands are the primary support used to lift the vehicle off the ground while others are auxiliary support jack stands. This means they are used as supplementary supports in addition to another lifting tool such as a 2 stand lift or a 4 stand lift.
Here is a list of the best tall jack stands available with our top pick being the one with the highest lift capability.
Best Tall Jack Stands
Toolsempire 2 Ton Underhoist Tripod Jack Stand
This is one of toolsempire’s heavy duty, steel jack stands designed to support shock absorbers, exhaust systems and other vehicle components during repairs.
It can support a load weighing up to 2 tons. The load sits on a detachable rubber saddle pad which helps to prevent the load from slipping, and provides a good cushion on the under section of the vehicle. You can achieve much higher than average height with this stand because it has a minimum lift height of 49 inches and a maximum lift height of 84 inches.
You will notice that this stand has a 3 – leg tripod design which assures you of good stability. This is further reinforced by a large triangular base measuring 24 x 24 x 24 inches.
This stand requires to be assembled but you can do it yourself if you are up to some reading and learning. When you order it, it comes in a package which includes the tripod stand, a hardware set and a manual.
Key Features
- 3- legged design
- Welded steel construction
- Weight capacity: 2 tons
- Lift height: Minimum 49 inches; maximum 84 inches
Pros
- Triangular base
- Detachable rubber pad
View price on Amazon
Dynamo DYOHT58003 Jack Stand
The Dynamo DYOHT58003 is a tall jack stand made of a thin rod of metal. With a minimum height of 54 inches and maximum height of 80 inches, it is clearly designed for higher than average lifts.
It comes as a single piece and not a pair, though it should be used with a 4-post lift. What is a 4-post lift? This is a tool usually found in professional auto-garages which allows a vehicle to be carefully driven onto two runways then lifted to expose its underside.
This way the technician can easily access otherwise hard-to-reach parts under the vehicle for maintenance. The Dynamo DYOHT58003 jack stand serves as a support stand under the four-post lift.
It weighs 31.3 pounds and can support loads weighing up to 1500 pounds. A circular base makes it stable enough to support the load.
A 3-month warranty is offered from the date of purchase.
Key Features
- Height: Minimum: 54 inches and maximum 80 inches
- Tall thin rod
- Weight capacity: 1500 pounds
- Weight: 31.3 pounds
Pros
- 3 month warranty
- Circular base
- Reasonably priced
View price on Amazon
Blackhawk Automotive ¾ Ton High Reach Auxiliary Jack Stand
As is indicated in its name, this jack stand is an auxiliary stand. It is not designed to support an entire vehicle but rather provide partial or additional support for vehicle components during repair. It is designed for professional mechanics.
This stand has a smooth exterior finish and is made from rugged tubular steel with a strong frame which prevents distortion or twisting when supporting a load. The weight capacity is ¾ ton (1500 pounds). You can use this for fairly high support because the minimum lift height is 53 ¾ inches and the maximum is 80 inches.
At the top is a 5.25 x 1.5 inches saddle and at the bottom of the stand is a circular base with a diameter of 12 inches. This ensures the stand is stable under pressure. A 1 year warranty is available to help with any problems in the first 12 months of use.
Key Features
- Auxiliary support
- Weight capacity: ¾ ton
- Lift height: Minimum – 53 ¾ inches ; Maximum 80 inches
- Circular base
- Saddle size: 5.25 inches x 1.5 inches
Pros
- Rugged tubular steel
- 1 year warranty
- Smooth exterior finish
View price on Amazon
Dynamo DYOHT58005 Jack Stand With Foot Pedal
This is another jack stand designed for use as a support tool and not as a primary support stand. It is designed for use with 4-post or 2-post lifts to add to the hold provided by the lift and ensure the safety of the technician. These are professional lifts which raise a vehicle above the ground, effectively exposing the underside for quick and easy repair.
The Dynamo DYOHT58005 jack stand has a lift capacity of 1500 pounds, and can easily be placed in position under the lifting points of cars and trucks undergoing repair. The lift range is impressively wide, with a minimum lift height of 54 inches and a maximum of 80 inches. A circular base with a diameter of 12 inches makes the stand firm and stable.
The most unique aspect about this stand is that it has a foot pedal. It is used to adjust the stand to the different heights and enables you adjust heights faster and with ease. When using the foot pedal your maximum lift height increases by an inch to bring it to 81 inches.
This product comes with a 3-month warranty on material and workmanship.
Key Features
- Weight capacity: 1500 pounds ( ¾ ton)
- Provides additional support
- Lift height: Minimum – 54 inches; maximum 80 inches
- Circular base
Pros
- Has a foot pedal
- 3-month warranty on material and workmanship
View price on Amazon
Omega 32107B 10 Ton Pin-Style Jack Stand
Next on our list of best tall jack stands is the Omega 32107B made using sturdy welded steel which assures you of superior safety and strength. A heavy gauge steel frame prevents the jack stand from twisting when under pressure. These stands are supplied in pairs so you can expect two stands in the package when you order.
This stand has a weight capacity of 10 tons, making it a heavy duty tool which can be used to lift SUVs, light duty and medium duty trucks. The height lift range is worth a second look if you often need to lift vehicles to higher than average heights. The minimum lift is 28 inches and the maximum height possible is 47 inches.
Locking is done using the pin-lock mechanism. A heavy duty pin is slipped into one of the slots depending on the height desired. Pins used in jack stands could easily get misplaced, rendering the stand useless.
To make sure this doesn’t happen, the pin is attached to the stand. The large saddle measuring 3 3/8 inches x 5 inches provides a secure support for the load while a 4 -leg base measuring 16 inches x 16 inches ensures a sturdy support.
Key Features
- Supplied in pairs
- Weight capacity: 10 tons
- Height: Minimum – 28 inches; Maximum 47 inches
- Steel construction
- Large saddle
- 4 – leg base
Pros
- Pin- style lock
- Pin attached to stand
- 1 year warranty
View price on Amazon
Sunex 1410 10 Ton Jack Stand
Sunex jack stands are made by Sunex Tools. This company has over the years become a trusted name known for quality tools. There are many different models of jack stands under this name. The 1410 is a tall stand designed for high vehicles and trucks.
Its minimum height is 28.1 inches and it can be raised to 46.5 inches. A pin lock system is used to secure the stand at the desired height and the pin used is conveniently attached to the stand to make sure it doesn’t get lost. There are 10 height intervals, giving you a variety of height choices to make sure you get it just right.
The support tube is made of heavy schedule pipe which contributes heavily to the tool’s overall strength and stability. What is perhaps the most unique feature in this stand is the 4-leg steel base which makes it completely firm when it is under a load. The base dimensions are 15.7 inches x 15.7 inches.
It also boasts of a large saddle which provides extra surface area to support the load as well as locating lugs for additional stability. Saddle dimensions are 3.1 inches x 5.1 inches. A 1 year factory warranty is available to take care of your needs if you have any problems in the first year of use.
These come in pairs and are designed to be used together to achieve a weight capacity of 10 tons. If you have to carry this stand from one place to another, brace yourself for some heavy lifting because it weighs 69 pounds.
Key Features
- Sold and used in pairs
- Weight capacity: 10 tons
- Height: Minimum 28. 1 inches; Maximum 46.5 inches
- Height intervals: 10 x 2
- Finish: red
Pros
- Large saddle
- Locking pin attached to stand
- Steel, square , 4-leg base
- 1 year warranty
View price on Amazon
ESCO 25 Ton Pin Style Jack Stand
ESCO is a world renowned manufacturer of high quality equipment for automotive, mining, agricultural and commercial truck markets. The 25 ton pin style tool is a meticulously designed, reinforced jack stand made of steel. This is a heavy duty piece of equipment made to support loads as heavy as 25 tons.
Controlled pin holes are used to make height adjustment quick and easy with a 27 inch minimum lift height and 41 inch maximum lift height. There are 6 height adjustment levels to choose from, making it easy to achieve the perfect height for your specific job. The pin is conveniently attached to the stand using a chain to ensure it is not lost or forgotten anywhere.
A 13 inch x 13 inches square base ensures a strong solid hold on the load and firm grip on the ground. Reinforced welded brackets enable it support the load efficiently and a glossy yellow finish gives it its characteristic look. Considering the weight capacity, it is no surprise that this stand is on the heavy side, weighing 79 pounds (36Kg)
Key Features
- Sold and used as single stands
- Weight capacity 25 tons
- Lift range: Minimum – 27 inches ; Maximum – 41 inches
- Pin lock mechanism
- Steel construction
- Glossy yellow finish
Pros
- Controlled pin holes
- Pin attached to stand
- Reinforced welded brackets
View price on Amazon
Sunex 1310 10 Ton Jack Stand
This is the shortest of our list of tall jack stands made by Sunex Tools. The 1310 model looks just like all other Sunex models though they vary in terms of weight capacity and lift ranges. This one can support loads as heavy as 10 tons and are supplied in sets of two.
The lift range sands at a minimum of 18.9 inches and a maximum of 29.9 inches. Height adjustment is done using a pin and the fortified center column has 6 height adjustment levels to help you achieve the ideal height. The pin is attached to the stand so you don’t have to worry about it getting misplaced or accidentally removed from the column.
A large saddle measuring 5 inches x 3 inches helps to distribute pressure from the load to multiple contact points. Locating lugs on the saddle help to improve balance and prevent accidental tipping.
4 steel legs create a 17 inch x 17 inch base which ensures overall strength and stability. A year replacement warranty is available for faulty stands.
Key Features
- Supplied in pairs
- Weight capacity: 10 tons
- Lift range: Minimum – 18.9 inches ; maximum 29.9 inches
- Large saddle with locating lugs
Pro
- 1 year replacement warranty
- 4- leg base
- Pin attached to stand
View price on Amazon
Factors to Consider When Buying Tall Jack Stands
Lift height
The first factor to consider when you are shopping for a tall jack stand is its lift height. This is basically a measure of how high the stand can lift the vehicle it is used on. Height is generally measured in inches. The general assumption is the higher it can go the better because it increases its versatility.
Intertwined in this factor is the height range. A jack stand could be capable of lifting a vehicle relatively high but cannot be used for regular height requirements because its minimum height is higher than what the average user would require. In this case the height range is low. Take another instance where a jack stand is capable of lifting a vehicle relatively high but can also be used for low vehicles. Its height range is high.
Look out for a stand with a high lift range. You can use it for both high and low vehicles.
Weight Capacity of the jack stand:
This is the maximum weight a jack stand can support before it fails. It is expressed in tons and is often converted to pounds for easier understanding. You simply cannot ignore this detail. When you are specifically looking for a tall jack stand, you could come across jack stands which are ideal in terms of height but if they cannot support the weight of your vehicle, you cannot use them.
The bottom line is that you must find a jack stand which fits your bill in terms of height requirements as well as weight capacity. You cannot compromise on either one of the two.
Weight of the jack stand:
This is different from weight capacity. It refers to the weight of the stand when lifted. Aluminum is lighter than steel and cast iron is heaviest.
If you intend to carry your tall jack stand a lot, think about its weight before you buy. Some heavy duty jack stands weigh up to 80 pounds. You don’t want to be dragging this kind of weight around if you are a frequent traveler and user.
Construction Material
Jack stands are generally made out of aluminum, steel or in rare cases cast iron. Aluminum is not as strong as the other two metals and this is why it is usually used for light-duty jack stands. Steel and iron are much stronger so they are best for heavy duty stands some of which have weight capacities as high as 22 tons.
When picking out tall jack stands to be used for high lifts, it is best to go with strong metals such as steel or iron. Even if the vehicle you are lifting is not very heavy, the fact that it is lifted high means you need something string ad sturdy.
Primary vs auxiliary stands
The word ‘auxiliary’ appears in the names of some tall jack stands. What does it mean and what makes then different from other stands? An auxiliary jack stand is one which is used as an additional support to hold up specific parts or components of a vehicle.
There is a primary support holding the vehicle up and the stand is used to provide extra support. Primary stands on the other hand, are the sole support used to lift a vehicle.
When you are buying a tall jack stand, make sure you are aware of whether it is an auxiliary stand or a primary stand. If you buy an auxiliary jack stand it will be useless if you don’t have access to the primary support it is designed to be used with.
Base
The wider the base the better. A wide base gives the jack stand more stability and ensures it can never sink into the ground no matter how much pressure is put on it. A wide base also provides sufficient space onto which the pressure of a load can be distributed. This keeps the jack stand strong and stable.
Saddle
This is the often small section of the jack stand which comes into contact with the metal under the vehicle. Some saddles have lugs which help to keep the load firmly on the stand. Others have a removable rubber pad. This helps to increase friction between the saddle surface and the load therefore eliminating the chances of the load slipping.
FAQs
How tall is a tall jack stand?
There is no specific figure used to categorize jack stands as tall or short. However, it is true that jacks stand heights typically range between 12 and 25 inches. A jack stand whose maximum lift capacity is well beyond this, such as in the forties, sixties and even seventies (in inches) can be considered a tall jack stand.
What is the difference between a regular jack stand and an auxiliary one?
Like the term suggests, auxiliary jack stands are supplementary supports. They are used to provide additional support to ensure certain components or parts of the vehicle are held up safely. A regular jack stand is the main support used to lift a vehicle.
When are tall jack stands necessary?
These come in handy when you need to lift a tall vehicle such as a lifted truck off the ground. A more common use is when a vehicle is lifted high above the ground for repair work.
One or more components are either removed or installed in such a way that the center of gravity is changed. There is need for a support to hold specific parts or components in place.
Are tall jack stands heavy?
Not necessarily. Those that are significantly weighty are as such because of the metal used to make them and not necessarily their height.
Conclusion
Tall jack stands are a type of stands with an exceptionally high lift. They are used to lift high vehicles and are also used to support components of vehicles lifted high above the ground for repair and maintenance work.
From our review of the best tall jack stands in the market, the Toolsempire 2 Ton Underhoist Tripod Jack Stand carried the day. It has an impressively wide lift range allowing it to be used for a variety of purposes and on a variety of vehicles. It can lift a load up to 84 inches high.
Its steel construction makes it strong and durable and 3-leg design ensures stability. The rubber pad on the saddle is a unique, convenient addition which prevents slipping.
